Thông số kỹ thuật máy bơm KSB Etaprime
| Type of impeller | Open; Multi-vane impeller |
| Type of installation | Close- coupled |
| Maximum drive rating | 30 kW |
| Impeller material (EN standard) | 1. 4408;JL 1040 |
| Type of bearing | Ball bearings |
| Drive frequency | 50 Hz / 60 Hz |
| Maximum speed of rotation | 3. 500 1/min |
| Maximum flow rate | 150 m³/h |
| Maximum discharge-side pressure | 10 bar |
| Suitable for drinking water | Yes |
| Casing material (EN standard) | JL 1040; 1.4408 |
| No. of impeller entries | Single entry |
| Casing material | Cast stainless steel; Cast iron |
| Minimum flow rate | 4 m³/h |
| Suction characteristics | Self- priming |
| Drive voltage | Low voltage |
| Pull-out design | Yes |
| Pump set location | Dry installed |
| Max. permissible fluid temperature | 90 002 |
| Free passage | 10 mm |
| Main applications | Waste water / sewage;Industry and process engineering;Water;Building services |
| Type of installation | Stationary |
| Type of casing | Volute casing |
| Type of connection | Screw- ended, flange |
| Type of lubrication | Grease / Oil lubrication |
| Type of drive | Electric motor |
| Installation position | Horizontal |
| Shaft material (EN standard) | 1. 4571;C45+N |
| Type of coupling | Direct |
| Shaft seal type | Mechanical seal |
| Drive | IEC standardized motor, electric motor |
| Maximum head | 100, 00 m |
| Maximum rated pressure (discharge) | PN 16 |
| Minimum head | 3, 50 m |
| Nozzle position | End suction |
| Casing partition | Radially split |
| Guaranteed to be silicon-free | Yes |
Ứng dụng của máy bơm KSB Etaprime
