Thông số kỹ thuật máy bơm KSB Etaprime
Type of impeller | Open; Multi-vane impeller |
Type of installation | Close- coupled |
Maximum drive rating | 30 kW |
Impeller material (EN standard) | 1. 4408;JL 1040 |
Type of bearing | Ball bearings |
Drive frequency | 50 Hz / 60 Hz |
Maximum speed of rotation | 3. 500 1/min |
Maximum flow rate | 150 m³/h |
Maximum discharge-side pressure | 10 bar |
Suitable for drinking water | Yes |
Casing material (EN standard) | JL 1040; 1.4408 |
No. of impeller entries | Single entry |
Casing material | Cast stainless steel; Cast iron |
Minimum flow rate | 4 m³/h |
Suction characteristics | Self- priming |
Drive voltage | Low voltage |
Pull-out design | Yes |
Pump set location | Dry installed |
Max. permissible fluid temperature | 90 002 |
Free passage | 10 mm |
Main applications | Waste water / sewage;Industry and process engineering;Water;Building services |
Type of installation | Stationary |
Type of casing | Volute casing |
Type of connection | Screw- ended, flange |
Type of lubrication | Grease / Oil lubrication |
Type of drive | Electric motor |
Installation position | Horizontal |
Shaft material (EN standard) | 1. 4571;C45+N |
Type of coupling | Direct |
Shaft seal type | Mechanical seal |
Drive | IEC standardized motor, electric motor |
Maximum head | 100, 00 m |
Maximum rated pressure (discharge) | PN 16 |
Minimum head | 3, 50 m |
Nozzle position | End suction |
Casing partition | Radially split |
Guaranteed to be silicon-free | Yes |
Ứng dụng của máy bơm KSB Etaprime